Atec DiSEqCs by EMP

  • 2500DiSEqC 104-W25 AED

    4in/1out DiSEqC 2.0 switch for up to 4 satellite positions and 1 subscriber. It is designed for switching between 3 or 4 LNBs, which are addressed in receiver's menu as DiSEqC 1.0 setting A/B/C/D.

    More ...
    • 5 CAP Connectors | خمس وصلات كاب
    • 2501DiSEqC 109-W110 AED

      9in/1out 1.1 and 1.2 switch for up to 8 satellite positions and 1 subscriber, equipped with combiner for terrestrial band. It is designed for switching between 5 to 8 LNBs. Control mode is configured using built-in DIP switch, see Instruction manual for details. The product allows joining terrestrial band to common downlead.

      More ...
      • 10 CAP Connectors | عشر وصلات كاب
      • 2502DiSEqC S16-W240 AED

        17in/1out 1.1 and 1.2 switch for up to 16 satellite positions and 1 subscriber, equipped with combiner for terrestrial band. It is designed for switching between 9 to 16 LNBs. Control mode is configured using built-in DIP switch, see Instruction manual for details. The product allows joining terrestrial band to common downlead.

        More ...
        • 16 CAP Connectors | ستة عشر وصلات كاب
        • Last updated on 18-Dec-2017


        ATEC Amplifiers by EMP

        • 251015DB Amplifier40 AED

          1in/1out 15 dB gain terrestrial and satellite amplifier with high Pout and slope, feeded via coaxial cable from remote supply (9-20 V DC). The amplifier passes through DC power and LNB control.

          More ...
          • Last updated on 18-Dec-2017


          Atec Unicable Splitters by Inverto

          • 2550Unicable 2-way splitter, 5-2400 MHz14 AED

            This Unicable™ two-way-splitter supports bidirectional distribution of DC and RF signals. It enables control signals and DiSEqC commands sent from the Set Top Boxes to the LNB as well as DiSEqC commands sent from the LNB to the Set Top Box. This high-quality Unicable splitter features low insertion loss, high RF isolation between the output ports and allows greater flexibility in single home or MDU installation scenarios. Typically, the splitter would be installed at a central location (i.e. roof’s attic) with separate coax cables stretched inside the house/apartment to each Set Top Box. The Unicable splitter embeds protective diodes to guarantee DC isolation between connected set top boxes.

              • 2551Unicable II 4-way splitter, 5-2400MHz20 AED

                Frequency Range 5 - 2400MHz Inputs 1x F-Type, female Output 4x F-Type, female Insertion Loss 8.5dB max. Isolation between ports 18dB min. Input Return Loss -10dB max. Output Return loss -8dB max. DC 22kHz pass from Output to Input Yes Steering Diodes Yes Power Consumption 0.3W Working Temperature -30 ~ +60°C Weight 45gr Dimensions 78x45.5x13.8mm

                  • 2552Unicable II 8-way splitter, 5-2400MHz40 AED

                    Frequency Range 5-2400MHz Inputs 1x F-Type, female Output 8x F-Type, female Insertion Loss 15.5dB max. Isolation between ports 18dB min. Input Return Loss -10dB max. Output Return loss -8dB max. DC 22kHz pass from Output to Input Yes Steering Diodes Yes Power Consumption 0.3W Working Temperature -30 ~ +60°C Weight 124.8g Dimensions 86.2x69x28.5mm

                      • Last updated on 18-Dec-2017


                      Atec Multiswitches by EMP

                      • 2530Multiswitch MS17/8PIU750 AED

                        17in/8out standalone multiswitch for distribution of 16 SAT IF signals including terrestrial for up to 8 users

                        More ...
                          • 2531Multiswitch MS17/12PIU950 AED

                            17in/12out standalone multiswitch for distribution of 16 SAT IF signals including terrestrial for up to 12 users

                            More ...
                              • 2532Multiswitch MS17/16PIU1,100 AED

                                17in/16out standalone multiswitch for distribution of 16 SAT IF signals including terrestrial for up to 16 users

                                More ...
                                  • 2533Multiswitch MS17/26PIU1,450 AED

                                    17in/26out standalone multiswitch for distribution of 16 SAT IF signals including terrestrial for up to 26 users

                                    More ...
                                      • 2534Multiswitch MS25/12PIU1,350 AED

                                        25in/12out standalone multiswitch for distribution of 24 SAT IF signals including terrestrial for up to 12 users

                                        More ...
                                          • 2535Multiswitch MS33/12PIU1,600 AED

                                            33in/12out standalone multiswitch for distribution of 32 SAT IF signals including terrestrial for up to 12 users

                                            More ...
                                              • 2540Multiswitch MS17/10 data1,5001,450 AED

                                                17in/10out standalone multiswitch for distribution of 16 SAT IF signals including UHF band for up to 10 users. External data link 1 Gbit/s (RJ45), 10 coaxial links 100 Mbit/s. Power supply PA12 F is included in the package. For use only with EMP-Centauri NET CLASS wall sockets!

                                                More ...
                                                  • Last updated on 18-Dec-2017